|
EQA-JIT Silicones Plus - 10008 Clear All-Purpose Adhesive
All Purpose 10008 Sealant by JIT Silicones Plus, is an all purpose is made primarily for industrial sealing and bonding. 10008 a fast curing, and gives you a long lasting flexible seal. When cured, the elastomer resists weathering, ozone, moisture, UV exposure. It is mildew resistant and has a temperature range of -75º F to 350º F. It is FDA Compliant to 21CFR 177.2600, UL listed and NSF 51 Certified. 10008 is an alternative to Dow Corning 732 and 786.
Primary Use: Industrial Sealing and bonding including form in place gasketing and seam sealing
Click below to select a size:
|
|
JIT Silicones Plus - 10033 Neutral Cure Adhesive
Neutral Cure 10033 Sealant by JIT Silicones Plus, is a one-part, non-slumping paste that cures to a rubbery solid at room temperature on exposure to water vapor in the air. This Oxime cure RTV (room temperature vulcanizing) 100% silicone is designed to perform at temperatures from -75°F (-60°C) to 350°F (177°C), & intermittently to 400°F (204°C).
Primary Use: Industrial Sealing and bonding including form in place gasketing and seam sealing
Click below to select a size:
|
|
JIT Silicones Plus - 10039 Advanced Polymers Adhesive
With a service temperature rating of -40°F to 200° F this material is a non-yellowing formulation with UV stabilizers offering excellent weather resistance and performance. Advanced Polymer is a NON-Silicone High Performance Adhesive/Sealant which is far superior to Polyurethane Sealants which contains:
NO Solvents
NO Isocyanates
Click below to select a size:
|
|
EQA SS-330X
SS-301X is a fast curing silicone RTV adhesive rubber developed for applications requiring fast development of physical properties and fast unprimed adhesion. SS-301X is a 1-Part silicone that when applied to the substrate allows handling of the bonded assembly within an hour. Excellent unprimed adhesion to all rubbers, metals and most composites and plastics (including Polystyrene, Polycarbonate, Nylon, and PVC Pipe). When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. SS-301X works well in manual and automatic dispensing equipment.
Click below to select a size:
|
|
EQA 550
EQA 550 is a fast curing, high strength and high temperature silicone Room Temperature Vulcanizing (RTV) adhesive rubber. Its fast developing physical properties has excellent adhesion, and allows you to handle the bonded assembly in minutes. EQA 550 has features like fast room temperature cure times, works well with glass, metal, or rubber and an upper temperature limit of 550ᴼF. Available in 3 oz. tubes and 10.3 oz cartridges for use with standard caulking guns.
Click below to select a size:
|
|
Rutland® Fiberglass Stove Gasket Cement
Rutland® Fiberglass Stove Gasket Cement is a premium grade, high temperature adhesive. It's a creamy smooth black silicate-ceramic type cement formulated specifically to adhere fiberglass, silica, or ceramic textile gaskets to steel and cast iron. It withstands service temperatures to 2000º F and heat cures at a temperature of 500º F.
Click below to select a size:
|
|
|
|
Stay Connected!